A hot runner system is basically an
assembly of hot components that are used in injection molds made of plastic. They
are used to inject plastic into a cavity of the mold. The cavities are a part
of a mold that is in the shape of the parts that have been produced. There are
numerous advantages of using this kind of a system and this is the reason of
its immense popularity. The first and foremost benefit is that it has eliminated
the use of a cold runner system.
The increasing process
of the materials, cold system has become unaffordable for people. It is not
even feasible to be used in food and medical application. The reason being, it
cannot be regrind and its storage is quite noisy and dusty. Use of the new
application has made it easy to overcome this issue. The second reason is that,
it facilitates a reduction in the time of processing. The size of the shot is
smaller which reduces the cycle time. The third advantage is to improve the efficiency
of the molding system.
It is used to
start the new system because there is not any solidified component. There is no
need to remove the mold shot and cycling can also initiate cycling
automatically. As soon as the system has
attained an optimum temperature, the components of the mold begins to run. The
system also gives the facility of using a low injection pressure. It is beneficial in reducing a platen and mold
deflection.
For More
information Please Visit Our Site :- http://www.anole-hot-runner.com/hot-runner-system.html
No comments:
Post a Comment